Accutac Sdn Bhd
20, 1st Floor, Jalan Damar,
Permatang Damar Laut,
11960 Bayan Lepas,
Pulau Pinang, Malaysia.
+604-626 1381
+604-626 1561

Customize series power supply

Customize series power supply Customized Series FUG ELEKTRONIK GmbH


The products shown below are examples.

HCV 190M-12000

  •  
    The HCV 190M-12000 is a multiple power supply with up to 10 high voltage sources operated on a floating high voltage potential of up to 12kV.
  •  
    Residual ripple and stability of the sources are in the range of 10E-5 of the final value.
  •  
    Customer-specific control unit based on the Probus V system
  •  
    Modular integrated system with floating hotbox in double 19'' rack 9HU
  •  
    Flexibly equipped with up to ten floating sources
  •  

HCD 40000 – 7000 MOD

  •  
    The HCD 40000-7000MOD is a stable dual DC power supply with two outputs - master-slave. Each output delivers high voltage up to 7kV and a maximum output current of 7.15A; power limited to 20kW/output.
  •  
    Both high-voltage sources with identical setpoints (master-slave) can be operated in parallel and serially.






HCK 50000 – 50000 MOD

  •  
    The HCK 50000-50000 MOD is a capacitor charger with an output voltage of 0-50kV and an output current of 0-3A. For output voltages up to 25kV the full output current is supplied. At higher output voltage up to 50kV the current is reduced to 2A.
  •  
    These power supply units operate a pulse forming network (PFN) which is part of the klystron modulator of an acceleration structure for free-electron lasers (FEL).
  •  
    Very good pulse to pulse reproducibility (100ppm at 50 Hz)
  •  
    Fast regulation for high repetition rates: The power supply operates with fast discharges at the output from full voltage to zero within 1µs with subsequent recharging to 50kV, 50 times per second.



HCK 600000 – 65200 MOD

  •  
    Three of these power supplies provide the energy to accelerate an electron beam in a linear accelerator with energy recovery (ERL).
  •  
    Output klystron power supply: 0.... - 65.2kV; 0.... - 9.2A (max. 600kW)
  •  
    4 auxiliary power supplies with different output voltage: partly potential-free at HV output
  •  
    Stored energy: less than 20 J (0.2 mm copper wire must not burn through in case of short circuit)
  •  
    The entire system is controlled by a central PLC with sophisticated locking and security measures.






  •  
  •  

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version