SPS Electronic

SPS Electronic High-voltage cable

 

• Special cable for voltages up to 12,500 V and currents up to 40 A
• Available in different versions - see table below
• Minimum purchase / order unit 10 m

SPS Electronic Set High-voltage test probe SP 02 and SP 03


 

• Version: 1 piece SP 02 without start switch and 1 piece SP 03 with start switch
• Test voltage: Contour / connection: 25,000 V DC 
• Max.

• Application: OEM, test equipment
• Voltage / current: Max. 10,000 V DC / 1 A

• Application: OEM, Test devices
• Voltage / current: Max. 7,000 V / 16 A
• 4 mm plug 

SPS Electronic High-Voltage Connectors Series 51 71 91

• Application: Plug connection for test systems
• Number of poles: Max. 9 high-voltage connections
• Voltage / current: Max.

• Switching voltage max. 6000 VAC
• Continuous current max. 30 A
• Two changers
• Faston connections 6.3 mm
• Excitation coil 24 VDC / 70 mA
• Reduced excitation current

• Switching voltage max. 6000 VAC
• Continuous current max. 30 A
• Two changers
• Faston connections 6.3 mm
• Excitation coil 24 VDC / 70 mA
• Reduced excitation current

• Switching voltage max. 6000 VAC
• Continuous current max. 30 A
• Two changers
• Faston connections 6.3 mm
• Excitation coil 24 VDC / 200 mA

• Switching voltage max. 6000 VAC
• Continuous current max. 30 A
• One changer
• Faston connections 6.3 mm
• Excitation coil 24 VDC / 200 mA

SPS Electronic High-voltage relay RL 20 RL 20-2

• Switching voltage max. 6000 V/AC
• Continuous current max.

SPS Electronic Universal safety tester S 6600H
 

• Modern desktop device
• High-voltage test AC: 100 - 5,500 V / 0 - 20 mA
• High-voltage test DC: 100 - 6,000 V / 0 - 20 mA
• Insulation measurement DC: 100 - 6,000 V / 100 kΩ - 50 GΩ
• Ground bond test AC: 1 - 32 A / 0 - 6 Ω
• Resistance measurement: 1

SPS Electronic Ground bond tester P 6600H
 

• Modern desktop device
• Ground bond test AC: 1 - 32 A / 0 - 6 Ω
• Resistance measurement: 1 Ω - 1 MΩ
• Continuity test: < 14 Ω ≙ short circuit i > 100 kΩ ≙ no continuity
• 4-wire measurement technology
• Fully electronic power

SPS Electronic Surge tester ST 6600B
 

• Desktop device
• Surge voltage test: 200 - 6,000 V
• Partial discharge measurement: 200 - 6,000 V
• Impact energy: max. 0.

SPS Electronic Partial discharge tester PD 4020L
 

• Plug-in 19" / 2 HU
• Voltage measurement up to 5,500 V AC or 6,000 V DC
• Pulse voltage measurement up to 6,000 V
• Partial discharge inception and extinction voltage (PDIV/PDEV)
• Repeated partial discharge inception and extinction voltage (RPDIV/RPDEV) with surge

SPS Electronic Hipot safety analyser S 6700H

• Modern desktop device
• High-voltage test AC: 100 - 5,500 V / 0 - 20 mA
• DC high voltage test: 100 - 6,000 V / 0 - 20 mA
• Insulation measurement DC: 100 - 6,000 V / 100 kΩ - 50 GΩ
• Ground bond test AC: 1 - 32 A / 0 - 6 Ω
• Substitute leakage current test AC: 50 -

SPS Electronics Insulation tester IS 6600H IS 6600H

• Modern desktop device
• High voltage test DC: 100 - 6,000 V / 0 - 20 mA
• Insulation measurement DC: 100 - 6,000 V / 100 kΩ - 50 GΩ
• Guard technology: 10 GΩ/kV
• Wide-range power supply unit: 90 - 250 V, 50 Hz / 60 Hz